Foam Ceiling Beams were created using 1 lb density EPS (expanded
polystyrene), latex paint and gel stain. 19 precut pieces of EPS were
tapered on site and put together using Loctite construction adhesive.
The project was completed for under $300.00 in material and the finished
project looks incredible.
Questions about this project or have a similar project in mind?
You may actually be looking for an expanded polystyrene (EPS) product. See the difference between STYROFOAM Brand Foam products and expanded polystyrene, which is often mistakenly referred to as Styrofoam.
“Thanks again for the excellent service. Your product knowledge made my job so much easier on this project.”
